Pluto 8816-E14

Dual Voltage
Metal recessed light.
Frosted glass lens.

Includes 12 VDC, 20 Watt Xenon bulb
and 120 VAC, 25 Watt Incandescent bulb.

SAFETY NOTE: These dual voltage lights are to be powered by only one voltage source at any given time. In other words, prevent both bulbs from being on simultaneously, as overheating may occur! To help prevent accidental overheating, a  relay can be incorporated into your circuit. For example, wire the 12 volt bulb to be fed through the normally closed contacts of a relay, and wire the 110 volt bulb to be fed through the normally open contacts of the relay. Control the relay coil with the 110 volt source. This way, 12 volts normally will reach your 12 volt bulb through the normally closed contacts, but whenever 110 volts is applied, the relay coil will open the 12 volt contacts, interrupting the 12 volt supply. Simultaneously, it will close the 110 volt contacts, energizing the 110 volt bulb. If unsure of how to accomplish this, consult with a licensed electrician.