12 Volt Dimmers

12 Volt Dimmers - D1201
for LED, Xenon, Halogen and Incandescent Lights

Dimmer D1201

12 Volt Dimmers

Colors: Available in white, chrome, sandstone or brass color

D1201 - 100 Watt
12 Volt DC Dimmers (15 volts dc max)
power consumption 2mA max

The D1201 dimmer can be used for incandescent, Halogen, Xenon or LED lights (not for fluorescent ligths). NOTE: Due to the high start-up current drawn by halogen and Xenon lamps, this dimmer may not be able to start 100 watts of these types of bulbs. In this case, reduce the quantity or wattage of bulbs in your circuit.

Great for new installations. Great for Retrofits - easily replaces an existing switch (install inline between 12 volt power source and lights).

CE marked

Dimensions:

12 Volt Dimmer - operation

Mounting Suggestions:

New installations: Make a cutout for the 2.125" diameter housing directly into your wall panel. Seat the housing into the wall cutout and mark the wall for 4 pilot holes to match the housing corner screw hole pattern. Remove the housing. Drill the pilot holes in the wall. Wire the dimmer to your wiring in the wall. Seat the dimmer housing into the wall cutout. Seat the dimmer guts in the housing, pushing the excess wire into the wall. Install 4 mounting screws to hold the housing to the wall, and snap the bezel into place (this hides the mounting screws).
To retrofit into an existing switch housing, you may want to mount the 12 volt Dimmer D1200 onto a blank wall plate that fits onto your existing switch housing (similar procedure to the preceding paragraph). Standard Blank Wall plates that fit standard residential style electrical switch boxes are available in various colors from hardware stores and electrical suppliers.

2 Wire Dimmer D1200
Wiring Diagram

12 Volt Dimmer - Wiring Diagram

OEM / Distributors - click here

Order now from any of the following vendors:

SailorSams.com - Dimmer Switch D1201

Top